Skip to main content
. Author manuscript; available in PMC: 2020 Jul 24.
Published in final edited form as: J Biomed Mater Res B Appl Biomater. 2016 Jun 3;105(7):1892–1905. doi: 10.1002/jbm.b.33725

FIGURE 2.

FIGURE 2.

Fabrication process of SMP embolic device. (a) Schematic and (b) photo of delivery system with resistive coil at distal end; (c) The SMP foam threaded over the resistive heating element; (d) The foam radially compressed using a clinical stent compression device. Image in panel (a) reproduced from Hwang et al.36 with permission from ASME.