Skip to main content
. Author manuscript; available in PMC: 2020 Aug 27.
Published in final edited form as: HardwareX. 2019 Oct 11;6:e00084. doi: 10.1016/j.ohx.2019.e00084

Fig. 7.

Fig. 7.

Attachment of the 45 mm hex standoffs to the Base. A) Each nut is placed into the side of the Base. B) A washer is added to the 45 mm hex standoff, which is then screwed into the nut. C) Image showing all hex standoffs attached to the Base.