Skip to main content
. Author manuscript; available in PMC: 2021 Jun 1.
Published in final edited form as: Bioprinting. 2019 Dec 25;18:e00072. doi: 10.1016/j.bprint.2019.e00072

Figure 1:

Figure 1:

a) Schematic representation of cell deformation due to mechanical forces during extrusion printing. As printing resolution increase from left to right with constant flow rates, fluid velocity increases along with shear stress, τ, and pressure drop, ΔP. b) Stress/strain curve of PEGDA 2000 hydrogel with representation of coated and uncoated cell deformation under increasing shear stress.