Skip to main content
. 2020 Apr 28;29:100523. doi: 10.1016/j.ijcha.2020.100523

Fig. 3.

Fig. 3

Multiplanar reformation (MPR) was used to create a double-oblique transverse plane. In this image the internal diameter of the existing bioprosthesis is manually traced, using the imaging software to calculate its cross-sectional area (mm2) and perimeter (mm). The operator then measured the minimum (Dmin = 22.4 mm) and maximum (Dmax = 23 mm) cross-sectional diameters.