Skip to main content
. 2020 Aug 15;13(16):3616. doi: 10.3390/ma13163616

Table 4.

Technical parameters of CEM I 52.5 HSR Portland cement (on the basis of the manufacturer’s information [46]).

Parameters Unit Value Requirements of the Standard
EN 197-1 [44]
Initial setting time (min) 249 ≥45
End of setting (min) 320
Specific density (g∙cm−3) 3.23
Specific surface (cm2∙g1) 4216
Water demand (%) 29.80
Compressive strength
after 2 days (MPa) 30.6 ≥20
after 28 days 60.9 ≥52.5
SO3 content (%) 2.66 ≤4.0
Cl content (%) 0.06 ≤0.1