Table 2b.
Designed Shaft-2 Parameters Using spreadsheet and relationships by Khurmi and Gupta (2005).
| Parameters | Prototype (100 kg) | Product (400 kg) | Symbols | Units |
|---|---|---|---|---|
| Power transmitted by the shaft | 333.33 | 933.33 | Psh | W |
| Speed of the shaft | 500.00 | 500 | N2 | rpm |
| Desired length of shaft | 0.31 | 0.31 | L2 | m |
| Torque transmitted by shaft | 6.37 | 17.82 | T | N.m |
| Diameter of the gear 3 | 0.17 | 0.17 | m | |
| Weight of fly wheel | 5.00 | 5.00 | kg | |
| Load on the gear tooth | 74.89 | 209.68 | W | N |
| Max bending moment from the chain | 21.70 | 75.95 | m1 | N.m |
| Max bending moment from gear | 34.80 | 121.8 | m2 | N.m |
| Max bending moment from flywheel | 52.08 | 182.28 | m3 | N.m |
| Maximum bending moment | 52.08 | 182.28 | mT | N.m |
| Factor of safety | 1.50 | 1.50 | ||
| Allowable shear stress | 45.00 | 45.00 | τ | MPa |
| Diameter of the shaft | 20.68 | 31.39 | d2 | mm |