TABLE 1.
Fast Baseline | Slow Baseline | Initial Perturbation | Early Change | ||||||
---|---|---|---|---|---|---|---|---|---|
R2 | P | R2 | P | R2 | P | R2 | P | ||
AP MoS | |||||||||
Left | 0.0007 | 0.81 | 0.0003 | 0.88 | Fast | 0.05 | 0.05 | 0.08 | 0.02 |
Right | 0.02 | 0.27 | 0.006 | 0.52 | Slow | 0.06 | 0.03 | 0.10 | 0.005 |
Step length | |||||||||
Left | 0.01 | 0.35 | 0.005 | 0.54 | Fast | 0.07 | 0.02 | 0.19 | <0.001 |
Right | 0.00002 | 0.97 | 0.02 | 0.22 | Slow | 0.13 | 0.0013 | 0.15 | <0.001 |
ML MoS | |||||||||
Left | 0.07 | 0.02 | 0.12 | 0.003 | Fast | 0.03 | 0.17 | 0.09 | 0.008 |
Right | 0.02 | 0.18 | 0.04 | 0.07 | Slow | 0.16 | <0.001 | 0.22 | <0.001 |
Single support | |||||||||
Left | 0.14 | 0.00109 | 0.09 | 0.008 | Fast | 0.08 | 0.01 | 0.26 | <0.001 |
Right | 0.13 | 0.0015 | 0.04 | 0.07 | Slow | 0.17 | <0.001 | 0.31 | <0.001 |
Double support | |||||||||
Left | 0.04 | 0.10 | 0.15 | <0.001 | Fast | 0.09 | 0.008 | 0.22 | <0.001 |
Right | 0.01 | 0.34 | 0.10 | 0.007 | Slow | 0.18 | <0.001 | 0.21 | <0.001 |
Step width | 0.04 | 0.08 | 0.05 | 0.06 | — | 0.03 | 0.14 | 0.07 | 0.03 |
Cadence | 0.15 | <0.001 | 0.14 | <0.001 | — | 0.23 | <0.001 | 0.36 | <0.001 |
R2 and P values are highlighted in bold if the regression line was significant after Bonferroni correction (α = 0.001042). During the fast and slow baseline, the variables were calculated for the left and right leg. During initial perturbation and early change, the variables were calculated for the fast and slow leg.