Skip to main content
. 2020 Sep 25;6(39):eaba2807. doi: 10.1126/sciadv.aba2807

Fig. 4. Frequency division of a 100-GHz repetition rate photonic chip Si3N4 microcomb.

Fig. 4

(A) From top to bottom: the optical spectra of the amplified soliton microcomb and the GSL with gain switching rates of frep/6, frep/10, and frep/15, respectively. (B) The enlargement of the comb spectra from 1546 to 1550 nm. (C) The phase noise spectra of the synthesized microwave signals. The blue dotted trace is the phase noise level of the 100-GHz frep inferred from the measured phase noise levels of the synthesized signals. The trace is not plotted above 30 kHz because of the limited control bandwidth of the SPL servo. The inset is a photograph of the Si3N4 microresonator.