. 2020 Sep 21;13(18):4189. doi: 10.3390/ma13184189

Table 3.

Loading parameters for the testing series under investigation.

Test Series	Crack Width in Cyclic Stage (U_O) [µm]		Lower Reversal Point (U_U) [mm]	Displacement Increment Per Cycle (I) [µm]	Number of Cycles [-]	Number of Successfully Tested Specimens
Test Series	Start	End	Lower Reversal Point (U_U) [mm]	Displacement Increment Per Cycle (I) [µm]	Number of Cycles [-]	Number of Successfully Tested Specimens
R	-	-	-	-	-	11
C40-NC-200	40	60	0.020	0.10	200	7
C40-MC-200			−0.010			10
C40-HC-200			−0.025			10
C40-NC-1000			0.020	0.02	1000	4
C40-MC-1000			−0.010			10
C40-HC-1000			−0.025			10
C40-NC-2000			0.020	0.01	2000	10
C40-MC-2000			−0.010			10
C40-HC-2000			−0.025			10
C100-NC-200	100	200	0.020	0.50	200	10
C100-MC-200			−0.010			10
C100-HC-200			−0.025			9
C100-NC-1000			0.020	0.10	1000	11
C100-MC-1000			−0.010			11
C100-HC-1000			−0.025			10
C100-NC-2000			0.020	0.05	2000	10
C100-MC-2000			−0.010			8
C100-HC-2000			−0.025			8