Skip to main content
. 2017 Dec 20;4(1):123. doi: 10.18063/IJB.v4i1.123

Figure 1.

Figure 1

(A) Schematic workflow of the production of PCL microfibres using electrospinning, following the procedures of Daud et al.[18], the analysis and threading procedure of microfibres and the fabrication of PEG conduits by microstereolithography, following the procedures of Pateman et al.[17] SEM micrographs illustrating components of the nerve guide testing device; (B) A 5 mm long hollow PEG NGC, fabricated by microstereolithography, and (C) PCL microfibres spun by electrospinning. (D) Conduit and microfibres were combined into a final testing nerve guide device.