Table 1.

Parameters for deposition of PLA/paclitaxel mixed layer film by spin coating and nanofibers by electrospinning

Process parameters for PLA/paclitaxel films by spin coating
Speed (rpm)	3000
Operational temperature (°C)	Room temperature
Deposition time (min)	4
PLA concentration in TFA (wt.%)	40
Paclitaxel concentration in DMSO	2.5 mg/100 μl (50%), 5 mg/100 μl (100%)
Process parameters for PLA/paclitaxel nanofibers by electrospinning
Voltage (kV)	17
Flow rate (μl/min)	1 × 10−2
Syringe outer/inner diameter (mm)	5.0 × 10−1/2.6 × 10−1
Operational temperature (°C)	Room temperature
Working distance (cm)	14 or 15
Deposition time (s)	> 60
PLA concentration in TFA (wt.%)	40
Paclitaxel concentration in DMSO	2.5 mg/1 ml (50%), 5 mg/1 ml (100%)
Volumetric mixing ratio (PLA: Paclitaxel)	3 ml: 200 μl