Table 2.
General printing parameters
| Parameter | Norm | Range (after heat treatment) |
|---|---|---|
| Standard accuracy [mm] | - | ± 0.2% (± 0.2) |
| Layer thickness [mm] | - | 0.03 ÷ 0.6 (used 0.034) |
| Maximum dimension of the part [mm] | - | 245 x 245 × 270 mm |
| Ultimate tensile strength | DIN EN ISO 6892–1:2009 | 1029 ± 80 MPa |
| Ultimate elongation [%] | 14 ± 0.4% | |
| Young’s modulus [GPa] | DIN EN ISO 6892–1:2009 | 104 ÷ 124 |
| Impact strength [J] | - | 7 ÷ 15 |
| Hardness [HV5] | DIN EN ISO 6507–1 | 320 ± 15 |
| Relative density [%] | - | > 99.5 |
| Density [g/cm3] | - | 4.41 |
| Max. operating temperature [°C] | - | 350 |