Table 10.
Processing parameters for compression molding (PLA/Jute) composites.
| Method | Rotation Speed (RPM) | Temperature (°C) | Process | Mold Temperature (°C) | Pressure (MPa) |
Time (Min) |
wt % | Ref. |
|---|---|---|---|---|---|---|---|---|
| WM | - | - | CM | 185 | 1.33 | 8 | 37.3 | [70] |
| - | - | - | CM | 180 | 6.89 | 40 | 50 | [71] |
| FS | - | - | CM | 180 | 13.79 | 40 | 50 | [71] |
| - | - | - | CM | 80–130 | 350 KN | 180 | - | [72] |
| CM | 150 | 0.6 | 10 | 40 | [73] | |||
| Extrusion | 25 | 75 and 80 | HP | 165 | - | 2–3 | 3–15 | [74] |
| - | - | - | HP | 110 | 50 | 180 | [75] |
CM—Compression Molding; FS—Film Stacking; HP—Hot Press; KN—Kilo Newtons; WM—Winding Machine.