Skip to main content
. 2020 Nov 7;13(21):5026. doi: 10.3390/ma13215026

Figure 2.

Figure 2

DMA sample indicating the orientation of the longitudinal (L), radial (R) and tangential (T) directions (A); schematic indicating the radial bending motion achieved by oscillation of one clamp in the tangential direction during the single cantilever mode test (B); oscillating load for CE samples with dynamic load 0.5 N and static load 2 N (C); applied load for AE samples with dynamic load 0.2 N and static load 2 N (D).