Table 5.
Drill target [sol] | 750–840 nm slope | 535 nm band depth | 670/440 nm ratio |
---|---|---|---|
Oudam drill tailings (loose) [1364] | 0.46e − 04 (6.63e − 06) | 0.061 (0.001) | 1.98 (0.04) |
Oudam drill tailings (packed) [1366] | −0.14e − 04 (5.54e − 06) | 0.050 (0.001) | 1.72 (0.01) |
Oudam dump pile presieve [1368] | −0.31e − 04 (6.62e − 06) | 0.048 (0.001) | 1.66 (0.01) |
Marimba drill tailings (loose) [1425] | −2.32e − 04 (4.88e − 06) | 0.101 (0.001) | 2.36 (0.02) |
Marimba drill tailings (packed 3–5) [1425] | −2.64e − 04 (3.78e − 05) | 0.094 (0.003) | 2.19 (0.09) |
Marimba dump pile presieve [1427] | −2.15e − 04 (5.21e − 06) | 0.095 (0.002) | 2.20 (0.01) |
Quela drill tailings [1466] | −1.73e − 04 (7.41e − 06) | 0.162 (0.002) | 4.28 (0.07) |
Quela dump pile presieve [1467] | −1.78e − 04 (5.27e − 06) | 0.140 (0.002) | 3.69 (0.08) |
Sebina drill tailings [1496] | −2.13e − 04 (9.90e − 06) | 0.194 (0.007) | 4.12 (0.23) |
Lake Orcadie drill tailings [1978] | −1.39e − 04 (5.64e − 06) | 0.042 (0.002) | 1.16 (0.01) |
Stranraer predust removal tool [2005] | −2.97e − 04 (1.65e − 05) | 0.156 (0.020) | 3.85 (0.34) |
Duluth drill tailings [2059] | −1.45e − 04 (1.85e − 05) | 0.279 (0.011) | 7.15 (0.38) |
Stoer dump pile [2156] | −0.51e − 04 (3.09e − 06) | 0.200 (0.002) | 5.38 (0.06) |
Inverness drill tailings [2172] | −0.37e − 04 (5.93e − 07) | 0.074 (0.002) | 2.84 (0.05) |
Highfield drill tailings [2225] | −0.54e − 04 (6.09e − 06) | 0.027 (0.001) | 1.39 (0.04) |
Rock Hall tailings [2263] | −2.13e − 04 (8.30e − 06) | 0.165 (0.001) | 4.11 (0.05) |
Note. Numbers in parentheses are the standard deviation of the average spectral parameter.