Table 3.
Weight and thickness of 3D-printed ODFs.
| Film | Weight (g ± SD) |
Thickness (mm ± SD) |
|---|---|---|
| E5 | 0.0544 ± 0.0005 a | 0.030 ± 0.003 a |
| E5-PT | 0.0717 ± 0.0055 b | 0.059 ± 0.003 b |
| E5-PT-PG | 0.0730 ± 0.0032 b | 0.060 ± 0.003 b |
| E5-PT-G | 0.0736 ± 0.0052 b | 0.061 ± 0.001 b |
| E15 | 0.0263 ± 0.0017 c | 0.013 ± 0.002 c |
| E15-PT | 0.0516 ± 0.0006 a | 0.056 ± 0.002 b |
| E15-PT-PG | 0.0554 ± 0.0003 a | 0.061 ± 0.001 b |
| E15-PT-G | 0.0549 ± 0.0002 a | 0.061 ± 0.001 b |
Note: 20% w/v of HPMC E5 and 10% w/v of HPMC E15 were used. For each test, means with the same letter are not significantly different. Thus, means with different letters, e.g., ‘a’ or ‘b’ are statistically different (p < 0.05).