Figure 8.

Surface temperature dependence on the number of sub-pulses within a burst (left picture), surface roughness dependence on the number of sub-pulses within a burst (right picture). Other parameters: P = 16 W, dx = 10 µm, v = 700 mm/s and number of scans = 2 (A). The surface of the sample after polishing using different average laser power when other parameters are ${\mathrm{N}}_{\mathrm{p}}$ = 10, dx = 10 µm, v = 700 mm/s and number of scans = 2 (B, first line). The surface of the sample after polishing using different numbers of sub-pulses when other parameters are P = 16 W, dx = 10 µm, v = 700 mm/s and number of scans = 2 (B, second line).