Table 2.

The effect of composition on the characteristics of mesopore structures [7].

MBGs with Different Compositions (mol.%)	Specific Surface Area (m2/g)	Pore Volume (cm3/g)	Pore Size (nm)	References
100Si	490		3.6	[54]
95Si5Ca	467		3.7
90Si10Ca	438		3.5
100Si	310	0.356	4.2	[55]
97.5Si2.5P (TEP)	270	0.308	4.4
97.5Si2.5P (H3PO4)	152	0.235	4.8
80Si15Ca5P	351	0.49	4.6	[18]
70Si15Ca5P	319	0.49	4.6
60Si15Ca5P	310	0.43	4.3
100Si	384	0.4	4.9	[56]
90Si5Ca5P	330	0.35	4.9
80Si15Ca5P	351	0.36	4.8
70Si25Ca5P	303	0.33	4.8
80Si10Ca5P5Fe	260	0.26	3.5	[57]
80Si5Ca5P10Fe	334	0.3	3.6
80Si0Ca5P15Fe	367	0.36	3.7
80Si15Ca5P	342	0.38	3.62	[34]
80Si10Ca5P5Mg	274	0.35	3.31
80Si10Ca5P5Zn	175	0.23	3.33
80Si10Ca5P5Cu	237	0.31	3.66
80Si10Ca5P5Sr	247	0.31	3.66
80Si15Ca5P	515	0.58	4.7	[58]
76.5Si15Ca5P3.5Ce	397	0.38	2.9
76.5Si15Ca5P3.5Ga	335	0.31	3.8
80Si15Ca5P	317	0.37	4.1	[59]
80Si10Ca5P5Zr	287	0.32	3.7
80Si5Ca5P10Zr	278	0.33	4.1
80Si5P15Zr	277	0.27	3.4
80Si15Ca5P	265	0.33	5.29	[60]
75Si15Ca5P5B	234	0.24	5.28
70Si15Ca5P10B	194	0.21	5.09