Skip to main content
. Author manuscript; available in PMC: 2021 May 16.
Published in final edited form as: J Am Water Resour Assoc. 2020 May 16;56(3):486–506. doi: 10.1111/1752-1688.12819

TABLE 4.

Parameters used in sensitivity analysis and their detail descriptions (Neitsch et al. 2011).

Parameter Description SWAT governing process SWAT parametrized scale
CN2 SCS runoff curve number for moisture condition II Runoff HRU
NDTARGR Number of days to reach target storage from current reservoir storage Reservoir flow Reservoir
ESCO Soil evaporation compensation coefficient ET HRU
SURLAG Surface runoff lag coefficient Runoff Basin
SMFMN Melt factor for snow on December 21 (mm H2O/day — °C) Snow Basin
EPCO Plant uptake compensation factor ET HRU
SFTMP Mean air temperature at which precipitation is equally likely to be rain as snow/freezing rain (°C) Snow Basin
SMTMP Threshold temperature for snowmelt (°C) Snow Basin
SMFMX Melt factor on June 21 (mm H2O/day — °C) Snow Basin
RCHRG_DP Aquifer percolation coefficient Groundwater HRU
GW_DELAY Delay time for aquifer recharge (days) Groundwater HRU
ALPHA_BF Baseflow recession constant Baseflow HRU
REVAPMN Threshold water level in the shallow aquifer for revap (mm H2O) Groundwater HRU
OV_N Manning’s “n” value for overland flow Runoff HRU
CH_K2 Effective hydraulic conductivity of channel (mm/h) Channel routing Subwatershed
TIMP Snow temperature lag factor Snow Basin
GW_REVAP Revap coefficient Groundwater HRU
CH_N2 Manning’s “n” value for the main channel Channel routing Subwatershed
SOL_AWC Soil available water capacity Runoff HRU
GWQMN Threshold water level in shallow aquifer for baseflow (mm H2O) Groundwater HRU
ALPHA_BNK Bank flow recession constant or constant of proportionality Channel routing Subwatershed

Note: HRU, hydrologic response unit.