Skip to main content
. 2020 Dec 29;14(1):100. doi: 10.3390/ma14010100

Table 3.

The following crystallographic parameters of nanoparticles with a constant degree of metal doping were determined by XRD as a function of heat treatment temperature: grain size, strain, lattice constant. Here, only Fe3O4 phase was detected, and no traces of α-Fe2O3 phase (a.p.—as prepared).

Name Size (nm)
± 1
Strain [103]
± 0.5
Fe3O4
Cell Size (Å) ± 0.02
Co0.20 a.p. 11 2.1 8.38
Co0.20 50 °C 12 2.1 8.39
Co0.20 100 °C 12 1.2 8.38
Co0.20 150 °C 13 3.2 8.38
Co0.20 200 °C 13 3.2 8.37
Co0.20 250 °C 12 2.8 8.37
Co0.20 300 °C 10 4.7 8.35
Co0.20 350 °C 11 1.7 8.34
Co0.20 400 °C 12 3.1 8.34
Co0.20 450 °C 12 2.5 8.36
Co0.20 500 °C 12 1.7 8.36
Mn0.20 a.p. 10 5.1 8.42
Mn0.20 50 °C 10 4.7 8.42
Mn0.20 100 °C 10 4.5 8.41
Mn0.20 150 °C 11 4.6 8.39
Mn0.20 200 °C 10 4.7 8.38
Mn0.20 250 °C 11 4.7 8.37
Mn0.20 300 °C 12 2.1 8.36
Mn0.20 350 °C 11 3.9 8.33
Mn0.20 400 °C 11 3.4 8.33
Mn0.20 450 °C 11 3.5 8.34
Mn0.20 500 °C 11 3.9 8.35
Ni0.20 a.p. 10 2.8 8.36
Ni0.20 50 °C 11 2.4 8.36
Ni0.20 100 °C 12 2.8 8.37
Ni0.20 150 °C 12 2.4 8.35
Ni0.20 200 °C 12 2.4 8.34
Ni0.20 250 °C 12 3.1 8.34
Ni0.20 300 °C 12 3.1 8.34
Ni0.20 350 °C 12 2.8 8.34
Ni0.20 400 °C 12 2.5 8.33
Ni0.20 450 °C 11 1.7 8.34
Ni0.20 500 °C 12 2.6 8.33