Table 4.

Tensile parameters for impact testing.

Ref. Data	Tensile Parameters				Maximum Tensile Strength (MPa)	Tensile Toughness (MPa × 10−3)
	E (MPa)	εcr ( με )	μ	β tu
TRC-AAC
Drop height 75 mm	162	2080	0	24	0.34	3.2
Drop height 150 mm	148	2080	0	43	0.31	8.0
Drop height 300 mm	148	2080	0	63	0.31	10.0
TRC-FRAC
Drop height 75 mm	162	2080	0.33	30	0.33	15.8
Drop height 150 mm	175	2080	0.33	40	0.36	20.7
Drop height 300 mm	202	2080	0.33	50	0.42	29.8