Table 2.

Analysis of the force displacement curves in Figure 11 and Figure 12.

Sample		Slope Linear Part		Failure Load		Failure Displacement
		Slope (N/mm)	xz/xy (%)	Load (N)	xz/xy (%)	Displacement (mm)	xz/xy (%)
Ninjaflex, 225 °C, 0.8 mm	xz	21.3	99.8	77.8	101.6%	3.13	106.2%
	xy	21.4		76.5		2.95
Ninjaflex, 235 °C, 0.8 mm	xz	25.8	104.1	45.1	122%	1.89	116.5%
	xy	24.8		69.9		1.60
Ninjaflex, 235 °C, 0.5 mm	xz	30.9	134.4	114.7	125.1%	3.22	101.0%
	xy	23.0		91.7		3.16
SH-TPU bulk	-	7.5	N.A.	60	N.A.	2.90	N.A.
SH-TPU, 225 °C, 0.8 mm	xz	8.0	111.7	>60	-	>3.50	-
	xy	7.1		>60		>3.50
SH-TPU, 230 °C, 0.8 mm	xz	9.7	125.4	>60	-	>3.50	-
	xy	7.7		>50		>3.50
SH-TPU, 235 °C, 0.8 mm	xz	12.1	135.1	>70	-	>3.50	-
	xy	8.9		>70		>3.50