Skip to main content
. Author manuscript; available in PMC: 2022 Feb 1.
Published in final edited form as: Adv Mater. 2020 Dec 16;33(5):e2004776. doi: 10.1002/adma.202004776

Figure 7.

Figure 7.

a) Microfluidic BBB system consisted of porous microcapillaries fabricated with TPP-based bioprinting. b) Scanning electron microscopy image of the microcapillaries with pores. c) Design of the microfluidic system with inlet, outlet, and multiple microcapillaries aligned in parallel. d) Numerical simulation of the fluid rate in the microfluidic device (half domain shown). e) Immunofluorescence staining against ZO-1 and f-actin of the microcapillaries. Copyright Wiley, 2018.[190] Reproduced with permission.