Skip to main content
. 2021 Feb 9;8:633611. doi: 10.3389/fcvm.2021.633611

Figure 2.

Figure 2

Processing steps for generating a 3D-printed model (A–D) vs. a CR-hologram (E): (A) DICOM-data viewed in the 3D Slicer application, marked based on an appropriate threshold; (B) a segmented 3D model; (C) a 3D model as an STL file; (D) a finished printed 3D model; (E) cross-sectional images converted to a CR-hologram.