Table 9.
Dimensional accuracy of PLA/PBAT/PBS/nano talc composites 3D prints.
| PLA/PBAT/PBS/nano talc | Width (mm) |
Deviation (%) | Length (mm) |
Deviation (%) | Thickness (mm) | Deviation (%) |
|---|---|---|---|---|---|---|
| Horizontal | ||||||
| 70/30/0/10 | 10.08 ± 0.03 | −0.75 | 59.87 ± 0.02 | 0.22 | 1.97 ± 0.03 | 1.35 |
| 70/0/30/10 | 9.98 ± 0.07 | 0.20 | 59.49 ± 0.01 | 0.84 | 2.03 ± 0.03 | −1.35 |
| 70/10/20/10 | 10.03 ± 0.04 | −0.28 | 59.72 ± 0.02 | 0.47 | 2.01 ± 0.03 | −0.56 |
| Vertical | ||||||
| 70/30/0/10 | 10.03 ± 0.05 | −0.32 | 59.92 ± 0.07 | 0.14 | 2.03 ± 0.02 | −1.54 |
| 70/0/30/10 | 9.95 ± 0.06 | 0.55 | 59.96 ± 0.05 | 0.06 | 2.13 ± 0.04 | −6.45 |
| 70/10/20/10 | 9.97 ± 0.06 | 0.34 | 59.93 ± 0.02 | 0.11 | 2.07 ± 0.02 | −3.65 |
Remark: Original dimension from CAD: width = 10 mm, length = 60 mm, thickness = 2 mm.