Table 4. Mechanical and Thermal Analysis of the Thermosetting Materials.

	DMA analysis			tensile test
resin	E′ (−100 °C) [MPa]	E′ (20 °C) [MPa]	E′ (100 °C) [MPa]	Eyoung [MPa]	σUTS [MPa]	εbreak [%]
ET1–2000	5400	9	5	3.4 ± 0.2	1.0 ± 0.1	42 ± 4
ET2–2000	4900	34	7	5.7 ± 0.2	1.4 ± 0.1	39 ± 2
ST2000	5900	13	5	6.0 ± 0.1	1.2 ± 0.1	47 ± 2
ET1–400	5400	1900	35	1.4 × 103 ± 0.1	59 ± 2	9.8 ± 0.4
ET2–400	4900	2200	570	1.6 × 103 ± 0.1	56 ± 1	10.5 ± 3.0
ST400	5900	3200	282	1.7 × 103 ± 0.1	66 ± 2	7.9 ± 0.2
Araldite GY 601043	n.r.	n.r.	n.r.	2.9 × 103	58	3.8

^aAll the data are obtained from the technical data sheet.⁴³