Skip to main content
. 2021 Feb 16;296:100420. doi: 10.1016/j.jbc.2021.100420

Table 1.

SV and DLS analysis of SEC-fractionated VWF/fVIII complexes

Sample (sw)20,w (S)
(Dz)20,w × 107 (cm2 s−1) PDI Rh (nm) MW (MDa)
f/fo
A280 IF A280 IF A280 IF
A 27.74 (27.52, 27.97) 26.81 (27.74, 26.88) 0.620 (0.609, 0.631) 0.26 32.3 4.10 3.92 3.37 3.42
B 25.80 (25.63, 26.96) 25.65 (25.59, 25.75) 0.650 (0.647, 0.653) 0.24 30.8 3.66 3.59 3.33 3.36
C 23.27 (23.11, 23.44) 23.24 (23.19, 23.32) 0.712 (0.706, 0.718) 0.24 28.2 3.04 2.99 3.22 3.26
D 20.45 (20.37, 20.62) 20.70 (20.65, 20.75) 0.792 (0.787, 0.797) 0.16 25.3 2.43 2.42 3.10 3.15
E 16.84 (16.73, 16.99) 16.80 (16.70, 16.95) 0.946 (0.943, 0.949) 0.24 21.2 1.71 1.68 2.90 2.98

A280, absorbance at 280 nm; IF, interference.

Numbers in parentheses represent 95% confidence intervals.

(sw)20,w: Weight-average sedimentation coefficient adjusted the standard condition of 20 °C in water.

(Dz)20,w: z-average diffusion coefficient adjusted to the standard condition of 20 °C in water.

PDI: polydispersity index (Equation 6).

Rh: Hydrodynamic radius (Equation 7).

f/fo: frictional ratio (Equations 8 and 9).