Skip to main content
. Author manuscript; available in PMC: 2021 Mar 29.
Published in final edited form as: Biomed Mater Eng. 2021;32(1):1–14. doi: 10.3233/BME-201132

Figure 1:

Figure 1:

Experimental set-up. (A) The control parameter was the drop height; the acceleration of the impactor and the transmitted force at the base of the headform were measured. (B) Test Group I consists of off-the-shelf type I helmets. (C) Test Group II consists of type I helmets equipped with an air bubble cushioning liner between the suspension and headform. A basic type I construction helmet model was selected for the drop impact tests.