Table 3.

FIT-SAT treatment efficacy: best fit mixed-effect models. Information of the mixed-effect models used for different kinematic parameters.

Parameters	Model	df	AIC	BIC	LogLik	Test	L. ratio	p value
%MMA	m0	2	1445.9	1453.2	-721.0
	m1	3	1285.4	1296.3	-639.7	m0 vs. m1	162.5	<0.001
	m2	4	1234.9	1249.4	-613.4	m1 vs. m2	52.5	<0.001
	m3	7	1230.4	1255.8	-608.2	m2 vs. m3	10.5	0.015
	m4	10	1229.3	1265.5	-604.6	m3 vs. m4	7.2	0.066
%AI	m0	2	1595.7	1602.9	-795.9
	m1	3	1509.1	1519.8	-751.5	m0 vs. m1	88.7	<0.001
	m2	4	1402.9	1417.2	-697.5	m1 vs. m2	108.2	<0.001
	m3	7	1408.0	1432.9	-697.0	m2 vs. m3	1.0	0.813
	m4	10	1413.2	1448.9	-696.6	m3 vs. m4	0.8	0.859
% left side	m0	2	1337.5	1344.7	-666.7
	m1	3	1267.1	1277.9	-630.5	m0 vs. m1	72.4	<0.001
	m2	4	1121.8	1136.3	-556.9	m1 vs. m2	147.2	<0.001
	m3	7	1125.9	1151.3	-556.0	m2 vs. m3	1.9	0.598
	m4	10	1130.8	1167.0	-555.4	m3 vs. m4	1.2	0.764
% right side	m0	2	1331.0	1338.2	-663.5
	m1	3	1123.3	1134.2	-558.7	m0 vs. m1	209.7	<0.001
	m2	4	1093.2	1107.7	-542.6	m1 vs. m2	32.2	<0.001
	m3	7	1091.4	1116.7	-538.7	m2 vs. m3	7.8	0.050
	m4	10	1093.1	1129.4	-536.6	m3 vs. m4	4.2	0.238