Skip to main content
. 2021 Apr 5;11:7497. doi: 10.1038/s41598-021-87007-2

Figure 7.

Figure 7

STEM-HAADF images of the device cross-section, after a sweep to (a) − 5 V, (b) 0 V, (c) 5 V and (d) 7 V using a current compliance of 30 µA. Dashed lines in (a) indicate the Pt/film/substrate interfaces. Pt layer was deposited on the top of the device to protect the film from ion beam damage during the sample preparation and to serve as an anode for IV measurements.