Skip to main content
. 2021 Apr 6;11:7546. doi: 10.1038/s41598-021-87243-6

Table 2.

The experimental data of KTZ solubility in SC-CO2 based on distinct conditions (The experimental standard deviation and the experimental standard deviation of the mean (SD) were obtained by S(yk)=j=1n(yj-y¯)2n-1 and SD(y¯)=S(yk)n respectively.

Temperaturea (K) Pressurea (MPa) Densityb (kg/m3) Binary
y2 × 105 (Mole Fraction ) Standard deviation of the mean, SD(ȳ) × (105) Expanded uncertainty of mole fraction (105 U) S (Solubility (g/l))
308 12 768.42 0.17 0.001 0.008 0.016
15 816.06 0.34 0.003 0.016 0.034
18 848.87 0.44 0.017 0.039 0.045
21 874.4 0.62 0.017 0.044 0.066
24 895.54 0.80 0.034 0.077 0.087
27 913.69 0.94 0.017 0.054 0.104
30 929.68 1.09 0.051 0.114 0.122
318 12 659.73 0.07 0.003 0.007 0.006
15 743.17 0.32 0.010 0.027 0.036
18 790.18 0.85 0.034 0.079 0.081
21 823.7 1.31 0.035 0.090 0.130
24 850.1 1.68 0.069 0.157 0.173
27 872.04 2.11 0.035 0.115 0.222
30 890.92 2.59 0.086 0.207 0.279
328 12 506.85 0.04 0.001 0.003 0.003
15 654.94 0.30 0.002 0.015 0.026
18 724.13 0.98 0.035 0.082 0.086
21 768.74 1.82 0.052 0.131 0.169
24 801.92 2.76 0.050 0.160 0.267
27 828.51 4.02 0.087 0.247 0.402
30 850.83 4.81 0.068 0.252 0.494
338 12 384.17 0.02 0.0006 0.001 0.001
15 555.23 0.22 0.010 0.023 0.015
18 651.18 0.90 0.017 0.056 0.077
21 709.69 2.29 0.052 0.145 0.196
24 751.17 4.2 0.032 0.198 0.381
27 783.29 6.02 0.085 0.316 0.569
30 809.58 8.02 0.121 0.427 0.784

n is the number of times each experimental data was measured (n = 3, in this work). Expanded uncertainty is U = k* ucombined and the relative combined standard uncertainty is defined as ucombined / y = i=1N(Piu(xi)/xi)2 in which u(xi)/xi is the relative standard uncertainty of each input estimate (xi) and Pi is known positive or negative number having negligible uncertainties. y2 and S are mole fraction of solute in binary system and solubility of solute in SC-CO2, respectively.

aStandard uncertainty u are u(T) = 0.1 K; u(p) = 1 bar. Also, the relative standard uncertainties are obtained below 0.05 for mole fractions and solubilities. The value of the coverage factor k = 2 was chosen on the basis of the level of confidence of approximately 95 percent.

bData from the Span–Wagner equation of state62.