Skip to main content
. Author manuscript; available in PMC: 2022 Jun 15.
Published in final edited form as: Compos B Eng. 2021 Mar 19;215:108803. doi: 10.1016/j.compositesb.2021.108803

Figure 18.

Figure 18.

(a) Photographs of hole drilling and water-jet cutting processes, and we have found that a pre-drilled hole with a diameter of 2 mm and then expanded to 10 mm using water-jet leaves no cracks and delamination around the hole in the specimen. (b) Open-hole specimen geometry and four-point bending experimental setup.