Skip to main content
. Author manuscript; available in PMC: 2022 Apr 1.
Published in final edited form as: Curr Protoc. 2021 Apr;1(4):e80. doi: 10.1002/cpz1.80

Figure 7:

Figure 7:

(A.) PG pellet at the tube bottom (material should be almost clear; sometimes a small amount of opaque material is present at the very bottom of the pellet – this is acceptable). (B.) Example of desired rod motion during proper vortexing. (C.) PG pellet after vortexing with glass rod: note rings of sacculus material up the side of the tube.