Table 6.

Averaged area of voids that were captured during SEM scanning.

Sample ID PLA/Tough PLA	Raster Orientation Angle (degree)	Infill Speed (mm/s)	Voids Area (µm2) PLA	Voids Area (µm2) Tough PLA
7/1	[45° −45°]	35	143	1434
9/3	[45° −45°]	50	236	2626
11/5	[45° −45°]	65	1054	8504
8/2	[0° 90°]	35	727	738
10/4	[0° 90°]	50	383	1117
12/6	[0° 90°]	65	822	366