Pot and time economies in the total synthesis of Corey lactone

Abstract

The Corey lactone is a highly versatile intermediate for the synthesis of a variety of prostaglandin hormones that natively control a multitude of important physiological processes. Starting from commercially available compounds, we herein disclose a time-economical, one-pot enantioselective preparation of the Corey lactone by virtue of a new diphenylprolinol silyl ether-mediated domino Michael/Michael reaction to afford the substituted cyclopentanone core in a formal (3 + 2) cycloadditive fashion. More broadly, this work advances the on-demand, gram-scale synthesis of high-value targets involving chemically orthogonal transformations, whereby distinct reactions of acids, bases, organometalics, reductants and oxidants can be carried out in a single reaction vessel in a sequential fashion.

The Corey lactone was synthesized by one-pot within 152 minutes from comercially available compounds using organocatalyst.

Introduction

The efficient synthesis of target molecules is a key aim in synthetic organic chemistry. For an ideal synthesis,¹ chemists consider several economic factors. Such considerations include but are not limited to atom economy,² step economy,³ and redox economy.⁴ In addition to these, we have proposed the concept of pot economy.⁵ Today one-pot operations are being advanced as effective ways to not only form key structural motifs in a single-pot sequence with stereoselectivity, but also to carry out a growing number of chemically distinct transformations that adopt apparently incompatible reagents such as strong and weak acids, bases, organometallics, Lewis acids, oxidants and reductants. Not only this, but one-pot operations circumvent several purification steps through strategic in situ quenching events, thereby minimizing chemical waste generation, and saving time. Thus, one-pot operations are not only efficient, but also tend to be more environmentally acceptable. Based on such advances in contemporary synthetic methods, we have accomplished the one-pot syntheses⁶ of (−)-oseltamivir, ABT341, and baclofen, the three-pot synthesis of PGE₁ methyl ester, and the five-pot synthesis of estradiol methyl ether.

The synthesis of molecules within the shortest possible time is also important, as can be inferred from the popular expression that “time is money”. A rapid synthesis reduces the cost of production and enables the possibility of on-demand synthesis. Hence, we have emphasized the importance of time economy in the synthesis of molecules, as recently reported in our 60 minute total synthesis of (−)-oseltamivir.^6a

Prostaglandins (PGs) are known to act as local hormones with the ability to control a multitude of important physiological properties. Some of their derivatives also serve as useful medicines.⁷ Given the biological importance of PGs and their scarce availability from natural sources, the scientific community has invested a great deal of effort and ingenuity into their efficient synthesis.⁸ Corey's synthesis via the Corey lactone is a landmark achievement, which greatly facilitated the science of PGs.⁹ Even today, new synthetic routes using radical methods to access PGF_2α from the Corey lactone have been developed by Baran.¹⁰ A three-component coupling method to access PGs was also reported by Noyori¹¹ and organocatalysts have been applied to the synthesis of PGs by Aggarwal¹² and our group.^6d,13

Given the synthetic significance of the Corey lactone, many synthetic protocols has emerged for the synthesis sequel to the seminal synthetic precedent by Corey.⁹ In general, the reported synthetic methods usually involves several reaction steps together with a considerable amount of time.¹⁴ Stork's synthesis involves 7 steps, from cis-cyclopentene-1,4-diol, and it features a radical cyclization-trapping strategy.¹⁴ⁱ Woodward reported an innovative 11 step racemic synthesis starting from cis-cyclohexane-1,3,5-triol via rearrangement.^14b The chiral Corey lactone was prepared from the chiral starting materials,^14h,14p resolution¹⁴ⁿ and by using diastereoselective Diels–Alder reaction using a chiral auxiliary.^9e,14r As for the asymmetric catalytic synthesis, Corey is also a pioneer, and his group elegantly synthesized the Corey lactone via an asymmetric Diels–Alder reaction that involved a chiral Lewis acid catalyst (Scheme 1).⁹ While chiral dirhodium mediated C–H insertion of diazoacetate was reported by Doyle for the synthesis of the key intermediate of the Corey lactone,^14s Chen recently reported a kinetic resolution in the asymmetric catalytic Baeyer–Villiger oxidation, although only a half of the materials was utilized.^14u In spite of the great progress in asymmetric catalytic reactions, it is still difficult to synthesize the Corey lactone via an asymmetric catalytic method. Although Corey's synthesis still remains a practical and excellent approach, it requires 10 steps, and the total reaction time is over 48 hours, excluding the required purification time. Thus, a more practicable and efficient asymmetric catalytic synthesis of this highly valued target within a short total reaction time and in a single vessel starting from commercially available compounds remains a prominent synthetic challenge. In this paper, we describe a practical and high-yielding synthesis of the Corey lactone by using a newly optimized organocatalyst-mediated asymmetric catalytic (3 + 2) cycloaddition reaction as a prelude to a reductive, oxidative sequence of events.

Scheme 1. Corey's synthetic route of the Corey lactone.

Results and discussion

Previously, we have reported the asymmetric Michael reaction of cyclohexanone and α,β-enal catalyzed by two amine catalysts namely; (S)-diphenylprolinol silyl ether¹⁵ and 4-hydroxyproline (eqn (1)).¹⁶ Based on this precedent Michael reaction of a ketone as the Michael donor, we designed a domino¹⁷ Michael/Michael reaction of 3-(dimethylphenylsilyl)propenal (1)¹⁸ and ethyl 4-oxo-2-pentenoate (2). There are two possible pathways after the first Michael reaction (Scheme 2): the first Michael reaction would afford an enamine, which might react with the α,β-unsaturated ester moiety via a 5-exo mode to afford 4¹⁹ or it might also react with the α,β-unsaturated ketone moiety via a 6-endo mode to afford 5.²⁰ After several investigations, the desired cyclopentanone derivative 4 was found to be obtained without any observed formation of the cyclohexanone 5 (eqn (2)).

1

2

Scheme 2. The possible reaction paths of A and B.

We also found that two amine catalysts are not necessary and that the domino Michael/Michael reaction proceeded in the presence of (R)-diphenylprolinol silyl ether (R)-3 (10 mol%) and p-nitrophenol¹⁶ in i-PrOH to afford cyclopentanone 4 with good yields in nearly enantiomerically pure form as a single isomer within 1 hour. The reaction also proceeded in the presence of 5 mol% of the catalyst within 8 hours without decreasing optical purity. It should be noted that the three contiguous stereogenic centers are completely controlled, and that the stereochemistry perfectly matches that of PGs. Given that the first formal (3 + 2) cycloaddition reaction²¹ proceeded efficiently to give the cyclopentanone core of Corey lactone, we further investigated the one-pot synthesis of Corey lactone.

To this end, the rest of the transformations involve (1) reduction of aldehyde, (2) stereoselective reduction of ketone, (3) lactonization, and (4) Tamao–Fleming oxidation²² for the transformation of the C–Si bond into a C–O bond. It is a challenge to carry out these transformations in a single pot because they involve several unrelated reactions such as reduction and oxidation, under different reaction conditions such as acidic or basic media; thus, the residual reagents might also interfere with the subsequent reactions. After an intensive screening of the reaction conditions, a rapid one-pot sequential synthesis was eventually accomplished (Scheme 3). After the first domino reaction, both aldehyde and ketone are reduced by LiAlH(t-BuO)₃ within 15 minutes at 60 °C to afford 6. Notably the ketone was reduced with excellent diastereoselectivity by a bulky reducing reagent, and the reaction time was only 15 minutes at an elevated temperature (60 °C) without any decrease in the diastereoselectivity. The addition of HBF₄ quenched the reaction and generated dihydroxy ester, which immediately cyclized to afford lactone 7 under the acidic conditions. In the course of THF removal under reduced pressure (80 °C for 15 minutes), concurrent conversion of the Si–Ph bond into a Si–F bond proceeded to provide 8. Although this conversion requires several hours in general, we accidentally found that the reaction could be completed within 15 minutes under condensed conditions during the evaporation process for the solvent swap. After neutralization of the reaction mixture with K₂CO₃, the reaction with H₂O₂ and KF for 1 hour at 40 °C afforded the Corey lactone 9. NMR spectroscopic analysis of the crude material indicated that 9 was obtained in good quality (see ESI†) and it was confirmed that 9 could be easily purified by facile column chromatography. All operations could be conducted in a single vessel, and the total yield of the gram-scale synthesis using 2 (1.4 g) was 50%; the total reaction time was 152 minutes. All starting materials were available from commercial sources.

Scheme 3. One-pot synthesis of the Corey lactone 9.

This one-pot operation involves one domino reaction composed of two reaction steps: (1) asymmetric Michael reaction of ketone and α,β-enal and (2) successive intra molecular Michael reaction; and five subsequent reaction steps composed of (3) reduction of aldehyde, (4) stereoselective reduction of ketone, (5) lactone formation, (6) conversion of the Si–Ph bond into a Si–F bond, and (7) conversion of the C–SiMe₂F bond into a C–OH bond. The total yield of 50% indicates that each reaction step proceeds in 90% yield (0.9 ⁷ = 0.48). It should be noted that HBF₄ played four roles in this process, namely (1) conversion of the O–Li or O–Al bond into an O–H bond after reduction, (2) decomposition of the excess LiAlH(t-BuO)₃, (3) promotion of the formation of lactone 7, and (4) transformation of the Si–Ph bond into a Si–F bond. The ability to employ a single reagent to effect various roles in a multistep reaction constitutes an efficient feature of a one-pot process.⁵ It should also be mentioned that 7, which can be isolated, is a useful intermediate because the selective protection of the two hydroxy groups in 9 can be initiated at this stage.

We then investigated the generality of the key domino reaction, namely the formal (3 + 2) cycloaddition reaction of α,β-unsaturated aldehyde and ethyl 4-oxo-2-pentenoate (2). The reaction of cinnamaldehyde was first examined under the best reaction conditions of 3-(dimethylphenylsilyl)propenal (1) using (S)-catalyst (S)-3, but the reaction was slow and afforded the product in 23% yield after 24 hours together with recovery of the starting materials. After re-optimization of the reaction conditions, it was observed that the amount of the reagent dramatically affected the yield. By using two equivalents of cinnamaldehyde in the presence of p-nitrophenol (100 mol%), the reaction proceeded at room temperature to afford the product as a single isomer in excellent yield (98%) in nearly optically pure form (>99% ee). With this good result obtained, the generality of the reaction was investigated (Table 1). For the β-substituent of α,β-unsaturated aldehyde, not only phenyl and 2-naphthyl but also electron-rich aromatics such as p-tolyl and p-methoxyphenyl substituents were suitable. Electron-deficient aromatics such as p-fluoro, p-chloro, and p-bromo phenyls, as well as m-bromo and o-bromo phenyls were all efficient aryl groups, affording the corresponding substituted cyclopentanone as a single isomer in nearly optically pure form. Heteroaromatic furyl was also a suitable substituent. It should be noted that, in all cases, excellent diastereo- and enantioselectivities were realized, and synthetically useful chiral substituted cyclopentanones were synthesized in nearly enantiomerically pure forms. In spite of the successful results in Table 1, β-alkyl substituted α,β-unsaturated aldehyde did not afford the product.

The generality of the asymmetric formal (3 + 2) cycloaddition reaction^a.

Entry	R	Time [h]	Yieldb [%]	Drc	eed [%]
1	Phenyl	10	98	>98 : 2	>99
2	2-Naphthyl	6	84	>98 : 2	>99
3	p-MeC6H4	12	91	>98 : 2	>99
4	p-MeOC6H4	15	88	>98 : 2	>99
5	p-FC6H4	6	81	>98 : 2	>99
6	p-ClC6H4	5	85	>98 : 2	>99
7	p-BrC6H4	4	83	>98 : 2	>99
8	m-BrC6H4	4	74	>98 : 2	>99
9	o-BrC6H4	7	82	>98 : 2	96
10	2-Furyl	24	80	>98 : 2	96

^aUnless otherwise shown, reactions were performed by employing α,β-unsaturated aldehyde (0.15 mmol), 2 (0.30 mmol), organocatalyst (S)-3 (0.015 mmol), water (0.45 mmol) and p-nitrophenol (0.15 mmol) in i-PrOH (75 μL) at room temperature for the indicated time.

^bIsolated yield.

^cDiastereomer ratio (dr) was determined by ¹H-NMR analysis of a crude mixture.

^dEnantiomeric excess (ee) of the products, as determined by HPLC analysis over a chiral solid phase after conversion to α,β-unsaturated ester by the treatment with Ph₃P CHCO₂Et. See ESI for details.

Conclusions

In summary, a pot- and time-economical enantioselective total synthesis of the Corey lactone was accomplished in a single reaction vessel within 152 minutes from commercially available reagents. This work represents the shortest and fastest synthesis of a nearly enantiomerically pure Corey lactone with excellent yield. The key reaction is a diphenylprolinol silyl ether-mediated domino Michael/Michael reaction of α,β-enal and ethyl 4-oxo-2-pentenoate (2) to afford trisubstituted cyclopentanone as a single isomer with excellent enantioselectivity; three contiguous stereogenic centers are completely controlled with the desired configuration. A sequential, rapid total synthesis was then realized through the judicious selection of rapid reactions and versatile reagents allowing for a one-pot reductive–lactonization-oxidative sequence. Given the key organocatalyst-mediated formal asymmetric (3 + 2) cycloaddition reaction displayed wide generality, the highly functionalized cyclopentanone products constitute useful chiral synthetic intermediates not only for PGs but also for other natural products and drug targets. Importantly, this efficient synthesis illustrates that highly valued targets can now be prepared rapidly, on-demand through the strategic and sequential use of acids, bases, organometalics, reductants and oxidants in a single reaction vessel, a feat previously thought unreachable for a complex multi-stepped synthesis.^5,6

Conflicts of interest

There are no conflicts to declare.