Skip to main content
. 2021 Jun 8;7:21. doi: 10.1038/s41526-021-00149-5

Table 2.

Test conditions for the 18 tests, representing low flow rate, medium flow rate, and high flow rate tests.

Case Coating applied Pin, psig Rein Gave, kg/m2 s tend, s Tin, K
1 No coating 100 63,030 455 21.0 95.95
2 No coating 80 58,909 436 21.5 89.82
3 No coating 60 35,073 300 21.55 90.96
4 1L coating 100 NA NA 10.6 NA
5 1L coating 80 62,901 454 11.5 96.07
6 1L coating 60 44,827 365 13.0 92.43
7 1L coating 40 26,763 249 15.05 88.80
8 1L coating 30 16,061 168 19.05 85.65
9 3L coating 100 58,704 422 9.70 96.26
10 3L coating 80 55,149 413 10.35 94.53
11 3L coating 60 44,326 355 11.45 92.56
12 3L coating 40 25,480 232 13.0 89.24
13 3L coating 30 19,455 195 15.75 86.54
14 4L coating 100 77,968 538 9.2 93.65
15 4L coating 80 63,406 459 9.6 92.19
16 4L coating 60 36,657 302 11.55 90.86
17 4L coating 40 26,792 249 12.0 89.21
18 4L coating 30 17,203 188 15.55 83.86

Conditions are based on the upstream TC station.