Skip to main content
. Author manuscript; available in PMC: 2021 Jul 1.
Published in final edited form as: IEEE Trans Biomed Eng. 2021 Jun 17;68(7):2233–2240. doi: 10.1109/TBME.2020.3048321

Fig. 2.

Fig. 2.

The DCC prototype is implemented with an energy-optimized winding made of solid copper wire in a 3d-printed sintered nylon mold (left), potted in place with corundum-filled epoxy (middle), and contained in an outer casing constructed from FR4 sheets and 3d-printed nylon (right). The scale bar in each pane is 100 mm long.