Skip to main content
. 2021 Jun 30;13(13):2175. doi: 10.3390/polym13132175

Figure 9.

Figure 9

3D morphologies comparison (RA = +45°/−45°, SS = 3000 r/min, FRT = 0.04 mm): (a) LT = 0.1 mm, DOC = 0.1 mm; (b) LT = 0.1 mm, DOC = 0.15 mm; (c) LT = 0.1 mm, DOC = 0.2 mm; (d) LT = 0.1 mm, DOC = 0.25 mm; (e) LT = 0.1 mm, DOC = 0.3 mm; (f) LT = 0.1 mm, DOC = 0.1 mm; (g) LT = 0.1 mm, DOC = 0.15 mm; (h) LT = 0.1 mm, DOC = 0.2 mm; (i) LT = 0.1 mm, DOC = 0.25 mm; (j) LT = 0.1 mm, DOC = 0.3 mm.