Table 1.

Parametric values for print conditions.

Parameters	Value	Significance
Target Bed Temperature	27–30 ºC	Goal temperature of build bed which is adjusted through the emitter lamp.
Binder Set Time	2 sec	Amount of time to set binder before drying.
Drying Time	10 sec	Amount of time set aside for drying between layers.
Emitter Output	100%	The output of the emitter lamp during the drying cycle.
Recoat Speed	Varies	Speed of the recoater during powder deposition.
Ultrasonic Intensity	100%	Strength of ultrasonic attached to the recoater.
Roller Traverse Speed	5 mm/sec	Speed of the roller as it goes across the build bed.
Roller Rotation Speed	300 rpm	Rate of rotation of the roller.