Table 1.

Dimensions and variants of all created geometries.

Parallel Grooving (Marked as ‘III’)
N°	Dimensions (mm)		N°	Dimensions (mm)		N°	Dimensions (mm)
1	width	0.20	5	width	0.50	9	width	1.00
	distance	2.00		distance	2.00		distance	2.00
	depth	0.10		depth	0.10		depth	0.10
2	width	0.20	6	width	0.50	10	width	1.00
	distance	5.00		distance	5.00		distance	5.00
	depth	0.10		depth	0.10		depth	0.10
3	width	0.20	7	width	0.50	11	width	1.00
	distance	2.00		distance	2.00		distance	2.00
	depth	0.20		depth	0.20		depth	0.20
4	width	0.20	8	width	0.50	12	width	1.00
	distance	5.00		distance	5.00		distance	5.00
	depth	0.20		depth	0.20		depth	0.20
Cross Grooving (Marked as ‘#’)
N°	Dimensions (mm)		N°	Dimensions (mm)		N°	Dimensions (mm)
13	width	0.20	17	width	0.50	21	width	1.00
	distance	2.00		distance	2.00		distance	2.00
	depth	0.10		depth	0.10		depth	0.10
14	width	0.20	18	width	0.50	22	width	1.00
	distance	5.00		distance	5.00		distance	5.00
	depth	0.10		depth	0.10		depth	0.10
15	width	0.20	19	width	0.50	23	width	1.00
	distance	2.00		distance	2.00		distance	2.00
	depth	0.20		depth	0.20		depth	0.20
16	width	0.20	20	width	0.50	24	width	1.00
	distance	5.00		distance	5.00		distance	5.00
	depth	0.20		depth	0.20		depth	0.20