Table 4.

Summary of the results of porosity, roughness and dimensional stability tests of samples obtained by 3D printing.

Samples	Porosity (%)	Ra (µm)	Dimensional Stability (60.00 mm × 10.00 mm × 1.0 mm)
PC	0.10	1.66 ± 0.08	60.09 ± 0.13 × 10.09 ± 0.12 × 0.92 ± 0.81
PC/3%S	0.14	8.02 ± 0.70	60.05 ± 0.01 × 10.08 ± 0.01 × 0.95 ± 0.01
PC/3%B	0.05	7.52 ± 0.04	60.12 ± 0.01 × 10.08 ± 0.01 × 0.88 ± 0.06
PC/3%L	0.24	7.99 ± 1.30	60.14 ± 0.06 × 10.06 ± 0.01 × 0.95 ± 0.01
PC/1.5%L/1.5%B	0.07	1.29 ± 0.08	60.06 ± 0.13 × 10.06 ± 0.11 × 0.96 ± 0.01
PC/0.5%CN	0.17	1.51 ± 0.04	60.04 ± 0.01 × 10.09 ± 0.01 × 0.87 ± 0.01
PC/0.5%CN/1.5%S	0.13	15.65 ± 1.68	60.08 ± 0.01 × 10.08 ± 0.04 × 0.81 ± 0.01
PC/0.5%CN/1.5%B	0.03	9.12 ± 1.06	60.05 ± 0.07 × 10.09 ± 0.01 × 0.86 ± 0.02
PC/0.5%CN/1.5%L	0.13	18.65 ± 0.85	60.10 ± 0.02 × 10.09 ± 0.03 × 0.82 ± 0.04