Table II.

Multiple Stages Temperature Validation 37°C of the 3D-Printed Disintegration Vessel When Loaded with 0.05 or 0.7 mL of PBS and During the Disintegration Process of Nurofen Meltlet. ± Symbol Represents Standard Deviation Between Measurements, over 250 s with Temperature Reading Frequency of 1 Reading/s. Each Temperature Was Validated Three Times.

Temperature validation	The mean temperature at the start (°C)	Mean temperature at the end (°C) ± Standard deviation (°C)
3D-printed kit with 0.05 mL PBS at 37°C	37.52 ± 0.00	37.51 ± 0.00
3D-printed kit with tablet and 0.05 mL PBS at 37°C	36.56 ± 0.00	37.47 ± 0.05
3D-printed kit with 0.7 mL PBS at 37°C	36.94 ± 0.00	36.93 ± 0.05
3D-printed kit with tablet and 0.7 mL PBS at 37°C	37.13 ± 0.42	37.44 ± 0.09

PBS, phosphate buffer saline