Table H.6.
Parameter values for manual calibration of each wave and country. All rates ( and each ) are expressed in , the other parameters are dimensionless. The symbol “–” means the parameter is not changed w.r.t. the value to its left in the table. The quantities and are depicted in Fig. G.2 and their derivation is described in the corresponding section.
Parameter | Manual fit Luxembourg |
Manual fit Austria |
Manual fit Sweden |
||||
---|---|---|---|---|---|---|---|
1st wave | 2nd | 3rd | 1st wave | 2nd | 1st wave | 2nd | |
1.287 | – | – | 1.287 | – | 1.287 | – | |
0.4433 | – | – | 0.4433 | – | 0.4433 | – | |
0.6808 | – | – | 0.6808 | – | 0.6808 | – | |
0.5979 | – | – | 0.5979 | – | 0.5979 | – | |
0.5246 | – | – | 0.5246 | 0.5246 | 0.5246 | 0.5246 | |
0.0513 | 0.1050 | 0.106 | 0.0991 | 0.0948 | 0.1875 | 0.0933 | |
0.0617 | 0.1514 | 0.1605 | 0.1047 | 0.1240 | 0.2383 | 0.1247 | |
0.0853 | 0.1514 | 0.1590 | 0.1073 | 0.0856 | 0.1093 | 0.0838 | |
0.1084 | 0.1084 | – | 0.1084 | 0.1084 | 0.1084 | 0.1084 | |
0.31 | 0.41 | – | 0.41245 | – | 0.27389 | ||
0.1534 | 0.08 | 0.042 | 0.162 | 0.065 | 0.1 | ||
0.7906 | 0.86 | 0.78 | 0.72 | 0.82 | 0.72 | 0.88 | |
0.7906 | 0.9048 | 0.8868 | 0.6972 | 0.8345 | 0.6667 | 0.8965 | |
0.8717 | 0.9814 | 0.8692 | 0.8499 | 0.9275 | 0.9021 | 0.9820 | |
0.9072 | 0.9816 | 0.8868 | 0.8292 | 0.8946 | 0.7866 | 0.9731 | |
0.9876 | 0.9979 | 0.997 | 0.99 | 0.992 | 0.99 | 0.992 |