. 2021 Aug 16;14(16):4605. doi: 10.3390/ma14164605

Table 2.

Material FPP parameters and exposure energy dose required to achieve a full conversion ratio during the printing process according to the reinforcement solid load content.

	SL 0%	SL 5%	SL 10%	SL 15%
μ (mm⁻¹)	1.139	2.45	3.69	4.59
K(cm²/mJ)	0.0045	0.0073	0.0094	0.0107
d₀ (mJ/cm²)	126	227	252	277