Table 1.

Characteristic and composition of additively manufactured polymers used for tests [30,31,32,33,34,35].

Material Brand	Producer	Name of Material in the Article	Printer	Chemical Composition	Concentration [% w/w]
Gr-17.1 temporary It	Pro3dure	M I	ASIGA UV MAX	7,7,9(or 7,9,9)-trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16-diyl bismethacrylate	20–50
				3,6,9-trioxaundecamethylene Dimethacrylate	10–25
				Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide	<50
				Silicon dioxide	<2
GR-10 guide	Pro3dure	M II	ASIGA UV MAX	Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide	≤2
				Esterification products: of 4,4′-isopropylidenediphenol, ethoxylated and 2-methylprop-2-enoic acid	≥95
GR-17 temporary	Pro3dure	M III	ASIGA UV MAX	7,7,9(or 7,9,9)-trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16-diyl bismethacrylate	20–50
				3,6,9-trioxaundecamethylene Dimethacrylate	10–25
				Phenyl bis(2,4,6-trimethylbenzoyl)-phosphine oxide	<50
				Silicon dioxide	<2
NextDent SG Orange	NextDent	M V	Phrozen Shuffle Lite 3D	Ethoxylated bisphenol A dimethacrylate	≥75
				7,7,9(or 7,9,9)-trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16-diyl bismethacrylate	30–50
				Phenyl bis (2,4,6-trimethylbenzoyl)-phosphine oxide	<10
NextDent C & B MFH	NextDent	M VI	Phrozen Shuffle Lite 3D	7,7,9(or 7,9,9)-trimethyl-4,13-dioxo-3,14-dioxa-5,12-diazahexadecane-1,16-diyl bismethacrylate	50–75
				2-hydroxyethyl methacrylate	<25
				Silicon dioxide	1–5
				diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide	1–5
				Ethoxylated bisphenol A dimethacrylate	<10
				ethylene dimethacrylate	<10
				Titanium dioxide	<0.1
				Mequinol; 4-methoxyphenol; hydroquinone monomethyl ether	<0.1