Skip to main content
. 2020 Nov 30;6:107. doi: 10.1038/s41378-020-00216-z

Fig. 5. Operation of MFBBs through the FCB by sequentially disabling the MFBBs while ‘saving’ the states of their control channels.

Fig. 5

a A flow channel in an MFBB was opened, and the flow through the channel was measured. After 1 min, the flow was stopped by pressurizing the control channel in the MFBB through the FCB. Then, the MFBB was disabled, and the pressure to the FCB for the MFBB control channels was released. After more than 17 h, the MFBB was re-enabled, and the flow channel was reopened. b Schematic representation of enabling (ON) and disabling (OFF) the MFBB. c Video frames of sequential MFBB operation