Table 4.
Optimized parameters for filling without degradation.
| Material | Geometry Tensile Test [cm3] | Standard | Amplitude [μm] | Time [s] | Pressure/Velocity | Ref. |
|---|---|---|---|---|---|---|
| PLA | 1.5 × 0.1 × 0.1 | IRAM-IAS-U500-102/3 | 48.1 | 3 | 3 bar | [112] |
| PLA Poly (nonamethylene azelate) (PE99) |
1.5 × 0.1 × 0.1 | IRAM-IAS-U500-102/3 | 24 | 1.2 | 300 N | [121] |
| PA12 | 33 × 2.5 × 1.25 | ASTMD638 | 35 | 5 | 2 bar | [108] |
| Poly (ε-caprolactone) Graphistrength® C10 carbon nanotubes | 1.5 × 0.1 × 0.1 | IRAM-IAS-U500-102/3 | 37 | 7 or 8 | 2500 N | [139] |
| PEEK | 30 × 2 × 2 | ASTMD638 | 52.2/58 | 8/5 | 5/6 | [117] |
| PPSU | 30 × 2 × 2 | ASTMD638 | 58/40.6 | 1.4/2.8 | 11/5 | [113] |
| UHMWPE | 30 × 2 × 1 | ISO-527-4 | 50.6/56.2 | — | — | [106] |
| UHMWPE + graphite | — | — | [114] |