Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2021 Sep 15;12:5459. doi: 10.1038/s41467-021-25334-8

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© The Author(s) 2021

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

PMC Copyright notice

Fig. 3 — Upper plot Discharge profiles (vs. Li-metal anode) of TiS₂, LiMn₂O₄, LiCoO₂, LiFePO₄, LiNi_0.5Mn_1.5O₄ and LiNi_xMn_yCo_zO₂. The estimated specific energy of each cathode is shown in parentheses, and the values are obtained by simply considering the working voltage of a Li metal||IC half-cell and the discharge capacity of each cathode. Lower plot Effect of the Ni amount on the discharge capacity, thermal stability (peak temperature (T_peak) and heat generation (∆H)), capacity retention and electronic conductivity (σ_e) of various NMC materials. Detailed information on these parameters is given in Supporting Table 2.