Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2021 Sep 15;8:240. doi: 10.1038/s41597-021-01012-8

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© The Author(s) 2021

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

The Creative Commons Public Domain Dedication waiver http://creativecommons.org/publicdomain/zero/1.0/ applies to the metadata files associated with this article.

PMC Copyright notice

Fig. 3 — Experimental setup for 3-point bending biomechanical tests. The lower part corresponds to the fixed part of the apparatus. Two 2-millimeter stainless steel rolls are attached to the lower part. Distance between static roll centers is 8 mm. The bone lies on these two rolls. The moving part of the apparatus corresponds to the top roll. The force is measured on this part, as illustrated in the figure. The top 2-millimeter top roll is centered in the setup.