Table 1.

Design parameters of reduced scale specimen.

Section Names	Height (mm)	Diameter (mm)	Type	Defective Parts	Defect Height (mm)	Defect Diameter (mm)
A1–A2	1600	200	Undamaged	-	0	0
B1–B2	1600	200	Core material cavity	Bottom	100	64
B3–B4	1600	200	Core material cavity	Bottom	300	64
C1–C2	1600	200	Edge damage	Bottom	100	160
C3–C4	1600	200	Edge damage	Bottom	300	160